Model Number

IG - 60301

TIGER  Gasket Maker  GRAY

Description

TIGER  silicone Gasket Maker can make almost any gasket instantly, so it can replace

most cut gaskets. It forms to any shape instantly and cures fast. After curing,

it resists cracking, shrinking and migration caused by thermal cycling. Also,

it can work up to 260°C and has good resistance of oil, water, anti-freeze and

transmission fluid. So it's widely used to seal timing chain covers and other

different covers. 

TIGER  Gasket Maker User's Guide: 

1. Clean all surfaces thoroughly. Remove old gaskets and prepare flange surfaces.

Dry and remove all oil and grease; 

2. Remove the cap, puncture inner seal of the tube, screw on nozzle and cut the nozzle

to desired size; 

3. Apply continuous, uniform 1~4mm bead around perimeter of one surface. Completely

surround all bolt holes; 

4. Wait about 10 minutes for silicone to skin over. Then reassemble the parts. 

5. Silicone dries to touch in 1 hour and allow 24 hours to fully cure and bond. 

Notes: 

1. Leave thickness for gasket when reassembling, Don't over-tighten the bolts. 

2. Sealant releases acetic acid (vinegar-like odor), Used with adequate ventilation.

3. Replace the cap after use

Colors :

Red , Gray , Blue & Black  is available 

Packing